Evergreen Metal Works

Our Production Process

The controlled sequence of operations, from slitting to packing, followed in the manufacture of every Evergreen transformer core.

Evergreen Metal Works production floor - our production process

Every Evergreen core is manufactured through a controlled sequence of operations, from slitting of the raw coil to packing of the finished core. Quality is verified at each stage to ensure consistent and dependable transformer cores.

The Production Flow

  1. 1

    Slitting

    Wide CRGO and CRNGO coils are slit into strips of the required width. Quality control begins at this stage.

  2. 2

    Cutting As Per Drawing

    Strips are cut at 90° or 45° in accordance with the customer's drawing, then punched and V-notched to the required geometry.

  3. 3

    Coating

    Cores are given an insulating coating to protect the electrical steel against corrosion.

  4. 4

    Pre Core Assembly

    Laminations are stacked and assembled into a finished core with overlap or step-lap joints.

  5. 5

    Testing

    Each core is inspected and tested for pre core loss and dimensional tolerance, and a test certificate is issued with every despatch.

  6. 6

    Packing

    Cores are packed as leg or sheet packets in wooden boxes or on pallets to ensure safe transit.

Watch

Evergreen Metal Works - Cutting

Evergreen Metal Works - Packaging

Looking for a reliable transformer core partner?

Tell us your specification and requirements. Our team will respond with the right core solution and a prompt quotation.