Slit Coils
CRGO and CRNO / CRNGO strips slit from the full range of electrical-steel coils, with high permeability across the standard thickness range.
Slit Coils
Slitting is the first stage in the manufacture of all cut lamination, and the quality achieved here carries through every subsequent operation. Evergreen therefore places particular emphasis on the slitting process.
Evergreen has the facilities to slit strips from the entire range of coils used in the electrical-steel industry, in both grain-oriented and non-grain-oriented grades. CRGO strips are supplied in thicknesses of 0.20 to 0.35 mm, and CRNO / CRNGO strips in thicknesses of 0.35 to 0.50 mm, each with high permeability.
Carbide slitting lines are used to minimise burr at the cut edge, and quality checkpoints during the slitting process keep the burr level of the material well within tolerance.
Slitting is carried out with a high degree of precision and without the generation of scrap; a 120 mm coil, for example, can be slit into two separate 60 mm coils.
- CRGO strips: 0.20–0.35 mm
- CRNO / CRNGO strips: 0.35–0.50 mm
- Carbide slitting lines, minimum burr
- Slit without scrap generation
Built And Tested To A Guaranteed Standard
Quality checks run from the first operation on the machine right through to despatch.
- Individually tested to standard guarantee specifications
- Test certificate for every despatch
- High degree of precision engineering
- Delivered in a wooden box or on pallets
See It In Production
Other Products
Looking for a reliable transformer core partner?
Tell us your specification and requirements. Our team will respond with the right core solution and a prompt quotation.